ELECTRIC MOTORS

DUMAS 6vdc 10,000 RPM High Speed Motor DU2025 $69.99

 l  Self-Aligning, Oil-Impregnated Bronze Bearings
 l  Neoprene Cushioned Mount
 l  Ceramic Lifetime Magnet
 l  Stainless Steel Shaft
 l  Long Life Copper Graphite Brushes
 l  Double Insulated Armature Winding, Impregnated and Baked
 l  Includes Two Brass Couplers w/Coupling Rod
 l  Volts: 6   RPM: 10,000
 l  Length: 3.125"    Weight: 8.75oz
 

DUMAS 6vdc Electric Boat Motor   DU2004   $69.99

 l  Self-Aligning, Oil-Impregnated Bronze Bearings
 l  Neoprene Cushioned Mount
 l  Ceramic Lifetime Magnet
 l  Stainless Steel Shaft
 l  Long Life Copper Graphite Brushes
 l  Double Insulated Armature Winding, Impregnated and Baked
 l  Includes Two Brass Couplers w/Coupling Rod
 l  Volts: 6    Max Amps: 4    RPM: 5,000
 l  Length: 3.125"    Weight: 8.75oz
 

DUMAS 12vdc Electric Boat Motor  DU2005   $69.99

 l  Self-Aligning, Oil-Impregnated Bronze Bearings
 l  Neoprene Cushioned Mount
 l  Ceramic Lifetime Magnet
 l  Stainless Steel Shaft
 l  Long Life Copper Graphite Brushes
 l  Double Insulated Armature Winding, Impregnated and Baked
 l  Includes Two Brass Couplers w/Coupling Rod
 l  Volts: 12    Max Amps: 4    RPM: 5,000
 l  Length: 3.125"    Weight: 8.75oz
 

MEPS-III Motorizing System MW836 $79.99

This is the Midwest MEPS-III Motorizing System.

This system allows the modeler to power the Boothbay Lobster Boat #964,
Cranberry Isle #984 and the Seguin #984 for radio control use.

FEATURES: Speed control with two speeds forward, two speeds reverse and fuse. 12V high torque motor. Pre-wired and pre-soldered connections. Double sided tape for attaching speed control to servo.

INCLUDES: One Midwest MEPS III Motorizing system with: Motor, two 5W resistors, 2A fuse w/ holder, wiper arm, wiring with (Kyosho-type) connectors and double sided tape.

REQUIRES: Installing in boat (refer to the boat's construction manual for installing of the motor and radio equipment). Two six cell flat battery packs with standard connector, (DTXC2100) CA glue to connect wiper to servo horn (GPMR6001)

SPECS: Motor: 12 - 14.4V, 5 pole RPM: 6500 @ 14.4V Typical Current Draw: 1.3A Fuse: 2A